What this TV size calculator does
It answers the two questions that come up before a TV purchase: which screen size suits the distance between the sofa and the wall, and how big a given diagonal really is. The first mode takes your viewing distance and a viewing angle, and gives the diagonal that fills that angle, with the width and height of the screen. The second mode takes a diagonal and an aspect ratio, and gives the width, height and area in inches and centimeters, plus the viewing distances that go with that size. Both modes work in feet and inches or in centimeters.
The geometry behind it
A screen seen from a seat fills a horizontal angle. Half the width, the distance and half the angle form a right triangle, so the width that fills an angle from a distance is:
The ratio is the width divided by the height: 16 ÷ 9 for a widescreen TV, 21 ÷ 9 for an ultrawide monitor, 4 ÷ 3 for older sets. The same triangle run backwards gives the distance at which a known screen fills an angle, and the angle a known screen fills from a known distance. Inches become centimeters at 2.54 cm per inch.
Where the viewing angles come from
Recommendation ITU-R BT.1845-1 defines the optimal viewing distance of a digital picture as the distance at which two neighboring pixels of the picture subtend one arc-minute at the eye, the typical limit of what human vision resolves. Table 1 of the recommendation lists that distance in picture heights (H) and the horizontal viewing angle that goes with it for each picture format: 4.8 H and 21° for 1280 by 720, 3.2 H and 31° for 1920 by 1080, and 1.6 H and 58° for 3840 by 2160. Sit closer than that and the pixel structure of the picture can become visible; sit farther away and detail the picture carries is lost to the eye.
The two presets on the calculator are those figures for HD and 4K pictures. They are about sharpness, not comfort: the recommendation says nothing about how large a screen feels pleasant, and many people prefer something between the two. That is what the slider is for. Other guidelines for cinema and home theater seating exist, but we could not open a primary source for them, so they are not quoted here.
A worked example
A 65 inch 16:9 screen is 56.7 inches wide and 31.9 inches tall. From a sofa 9 feet (108 inches) away, it fills an angle of 2 × atan(56.7 ÷ 2 ÷ 108), which is 29.4°, and the distance is 3.4 picture heights. That sits just outside the ITU figure for an HD picture, 3.2 H and 31°, so from that seat a 1080p picture looks sharp and a 4K picture shows more detail than the eye picks up. To reach the 4K figure of 58°, the same screen would have to be 4 ft 3 in from the seat, or the screen at 9 feet would have to be 137 inches, which no living room set offers. In practice the slider at 35 to 40° gives the sizes most people end up with; that is our own observation, not a standard.
Common TV sizes: width, height and distance
Width and height are for 16:9 screens, the picture only, without the frame. The distances are the ITU figures for a 4K picture (1.6 H, 58°) and an HD picture (3.2 H, 31°).
| Diagonal | Width | Height | Distance, 4K figure | Distance, HD figure |
|---|---|---|---|---|
| 32 in (81 cm) | 27.9 in / 71 cm | 15.7 in / 40 cm | 2 ft 1 in / 64 cm | 4 ft 2 in / 128 cm |
| 40 in (102 cm) | 34.9 in / 89 cm | 19.6 in / 50 cm | 2 ft 7 in / 80 cm | 5 ft 3 in / 160 cm |
| 43 in (109 cm) | 37.5 in / 95 cm | 21.1 in / 54 cm | 2 ft 10 in / 86 cm | 5 ft 8 in / 172 cm |
| 50 in (127 cm) | 43.6 in / 111 cm | 24.5 in / 62 cm | 3 ft 3 in / 100 cm | 6 ft 7 in / 200 cm |
| 55 in (140 cm) | 47.9 in / 122 cm | 27 in / 68 cm | 3 ft 7 in / 110 cm | 7 ft 2 in / 220 cm |
| 65 in (165 cm) | 56.7 in / 144 cm | 31.9 in / 81 cm | 4 ft 3 in / 130 cm | 8 ft 6 in / 259 cm |
| 75 in (191 cm) | 65.4 in / 166 cm | 36.8 in / 93 cm | 4 ft 11 in / 150 cm | 9 ft 10 in / 299 cm |
| 85 in (216 cm) | 74.1 in / 188 cm | 41.7 in / 106 cm | 5 ft 7 in / 170 cm | 11 ft 2 in / 339 cm |
Aspect ratios
At the same diagonal, a wider ratio gives a wider but shorter screen. A 34 inch 21:9 monitor is about 31.4 inches wide and 13.1 inches tall, while a 34 inch 16:9 screen would be 29.6 by 16.7 inches. The calculator fills the angle with the width, so an ultrawide needs a smaller angle for the same height. For the ratio of an odd screen size, the aspect ratio calculator finds it from the width and height, and the PPI calculator tells you how dense the pixels are on a given diagonal.
What the calculator leaves out
- The frame of the set: measure the cabinet or the wall space separately, with the length converter for inches and centimeters.
- Seat height and viewing angle from the side. The formulas assume a seat in front of the screen at the height of its center.
- Picture quality, brightness and room light, which change how close a screen can comfortably be.
- The resolution of the content. The ITU figures are for pictures that use the full resolution of the format; a low-bitrate stream shows its flaws earlier when you sit close.
How to use the TV size calculator
- 1Choose your units, feet and inches or centimeters.
- 2Pick My viewing distance and enter how far you sit, or pick A screen size and enter the diagonal and aspect ratio.
- 3Set the viewing angle with the slider or one of the two ITU presets. The result updates as you move it.
- 4Read the size or the dimensions, check the table for other angles, and copy the result or a link.
Sources
- Recommendation ITU-R BT.1845-1, Guidelines on metrics to be used when tailoring television programmes to broadcasting applications at various image quality levels, display sizes and aspect ratios: Table 1 with the optimal horizontal viewing angle and the optimal viewing distance in picture heights per picture format, and the one arc-minute definition.
Related guides
- Acres, Hectares, Square Feet and Square Metres Compared
- PPI vs DPI: Image Resolution for Print and Screen
- US Customary vs Imperial Units: Gallons, Pints, Tons, Stone
Frequently asked questions
What size TV should I get for my room?
Measure from your seat to the wall where the screen goes and enter that distance. The calculator gives the diagonal that fills the viewing angle you choose. ITU-R BT.1845-1 lists 31 degrees as the optimal horizontal viewing angle for a 1920 by 1080 picture and 58 degrees for a 3840 by 2160 picture, so those two presets bracket the usual range. A larger angle means a bigger screen or a closer seat.
How far should I sit from a 65 inch TV?
A 65 inch 16:9 screen is 56.7 inches wide and 31.9 inches tall. At the ITU figure for a 4K picture, 1.6 picture heights, that is 4 ft 3 in; at the figure for an HD picture, 3.2 picture heights, it is 8 ft 6 in. Enter 65 in the size mode to see both and the distance for your own angle.
Where do the 31 and 58 degree figures come from?
From Table 1 of Recommendation ITU-R BT.1845-1, which lists for each picture format the optimal viewing distance, defined as the distance at which one pixel of the picture subtends one arc-minute at the eye, and the horizontal viewing angle that goes with it: 3.2 picture heights and 31 degrees for 1920 by 1080, 1.6 heights and 58 degrees for 3840 by 2160. They describe when the picture looks sharp, not what feels comfortable, so use the slider for your own preference.
How are width and height worked out from the diagonal?
From the aspect ratio with the Pythagorean theorem. For 16:9, the height is the diagonal divided by the square root of 1 plus (16/9) squared, about 0.49 times the diagonal, and the width is 16/9 of the height, about 0.87 times the diagonal. A 55 inch 16:9 screen is therefore about 47.9 by 27 inches.
Does the diagonal include the frame?
No. The calculator works with the picture diagonal you enter. Add the width of the frame yourself when you check whether a set fits on a stand or in a cabinet.
Is anything sent to a server?
No. The whole calculation runs in your browser. Copy link puts the distance or size, the units, the ratio and the angle into the link, nothing else.