How to convert kilopascals to pounds per square inch
Multiply the number of kilopascals by 0.1450377.
Example: 25 kilopascals × 0.1450377 ≈ 3.6259 pounds per square inch.
More worked values: 3 kilopascals works out to 0.435113 pounds per square inch. 20 kilopascals works out to 2.9008 pounds per square inch. And 100 kilopascals works out to 14.5038 pounds per square inch.
kPa to PSI chart
| Kilopascals (kPa) | Pounds per square inch (psi) |
|---|---|
| 0.5 kPa | 0.072519 psi |
| 1 kPa | 0.145038 psi |
| 2 kPa | 0.290075 psi |
| 3 kPa | 0.435113 psi |
| 4 kPa | 0.580151 psi |
| 5 kPa | 0.725189 psi |
| 6 kPa | 0.870226 psi |
| 7 kPa | 1.0153 psi |
| 8 kPa | 1.1603 psi |
| 9 kPa | 1.3053 psi |
| 10 kPa | 1.4504 psi |
| 15 kPa | 2.1756 psi |
| 20 kPa | 2.9008 psi |
| 25 kPa | 3.6259 psi |
| 30 kPa | 4.3511 psi |
| 40 kPa | 5.8015 psi |
| 50 kPa | 7.2519 psi |
| 60 kPa | 8.7023 psi |
| 70 kPa | 10.1526 psi |
| 75 kPa | 10.8778 psi |
| 80 kPa | 11.603 psi |
| 90 kPa | 13.0534 psi |
| 100 kPa | 14.5038 psi |
| 250 kPa | 36.2594 psi |
| 500 kPa | 72.5189 psi |
| 1,000 kPa | 145.0377 psi |
Values are rounded to six decimals below 1, four decimals up to 1,000 and two decimals above. The converter above shows more digits.
Is the kPa to PSI factor exact?
NIST SP 811 lists 1 psi as 6,894.757 Pa, rounded to seven digits. The converter computes with 6,894.757293 Pa, which matches NIST in every digit NIST shows. That gives 1 kPa = 0.1450377 psi.
kPa to PSI in your head
A rule of thumb that works: divide by 7. It runs 1.5 % low on every value. Check it on 25 kPa: the rule gives 3.5714 psi, the exact answer is 3.6259 psi.
Need it closer? Divide by 6.9, which is only 0.076 % low (3.6232 psi for 25 kPa).
About the units
The kilopascal is 1,000 pascals. The pascal, one newton per square meter, is the SI unit of pressure.
PSI means pound-force per square inch. NIST SP 811 lists 1 psi as 6.894757 kPa.
Good to know about kPa and PSI
100 kPa is exactly 1 bar (SI Brochure), which is 14.5038 psi.
Sources: BIPM SI Brochure; NIST SP 811, B.8.
Going from pounds per square inch back to kilopascals? That is the PSI to kPa page. Close relatives: kPa to Bar, Bar to PSI, atm to PSI, PSI to Bar and PSI to atm. Any other pair: the Pressure Converter.
Frequently asked questions
How many pounds per square inch are in a kilopascal?
There are 0.1450377 pounds per square inch in one kilopascal.
How do I convert kilopascals to pounds per square inch?
Multiply the number of kilopascals by 0.1450377. For example: 25 kilopascals × 0.1450377 ≈ 3.6259 pounds per square inch.
Is 1 kPa = 0.1450377 psi exact?
It is rounded. NIST SP 811 lists 1 psi as 6,894.757 Pa, seven digits, and this factor is computed from those units.
How can I convert kilopascals to pounds per square inch in my head?
Divide by 7. The result is 1.5 % low; divide by 6.9 for an error of 0.076 %. For the exact value, multiply by 0.1450377.
How many psi is 200 kPa?
200 kPa is 29.0075 psi.
What is 40 kilopascals in pounds per square inch?
40 kilopascals equals 5.8015 pounds per square inch.